SNH TRADE CENTRE · LIVE PRODUCT

Increasing Flue Adapter 125mm Rigid To 150mm Flex

SKU: 20-125-MR

?

£20.83

● In stock

Catalogue demonstration

This staging page does not place orders. Products, variations and prices are read from WooCommerce; checkout will be integrated and tested separately.

View product on existing shop ↗

Product details

125mm Rigid to 150mm Flexible Flue Liner Increaser – 20-125-MR The 125mm Rigid to 150mm Flexible Flue Liner Increaser connects compatible 125mm single-wall stove pipe below to a 150mm flexible chimney liner above. This MI-FLEX bottom adaptor increases the nominal flue diameter from 125mm or 5 inches to 150mm or 6 inches. Therefore, it provides a single transition between two different sizes at the base of a suitable masonry chimney. MI-Flues makes the adaptor from approximately 0.6mm 316L stainless steel. In addition, its integral drain hole helps direct condensate back into the flue route rather than allowing moisture to collect outside the connection. 125mm to 150mm Increasing Flue Adaptor Features Rigid pipe to flexible liner increasing adaptor Manufacturer part number: 20-125-MR Connects 125mm rigid pipe below Connects to 150mm flexible liner above Increases the nominal flue diameter by 25mm Suitable for compatible MI-FLEX 316 liners Suitable for compatible MI-FLEX 904 liners Manufactured from 316L stainless steel Approximately 0.6mm material thickness Integral condensate drain hole Designed for the base of a masonry chimney Maximum continuous temperature class: 600°C Suitable for compatible wood-burning appliances Suitable for compatible smokeless-fuel appliances Suitable for compatible gas and oil appliances Natural stainless steel finish Designed as an MI-FLEX system component Technical Specification Brand: MI-FLEX Manufacturer: MI-Flues Part number: 20-125-MR Product type: Increasing rigid-to-flexible liner adaptor Lower rigid connection: 125mm / 5 inches nominal Upper flexible connection: 150mm / 6 inches nominal Nominal increase: 25mm / 1 inch Material: 316L stainless steel Material thickness: Approximately 0.6mm Finish: Natural stainless steel Temperature classification: T600 Pressure class: N1 Condensate resistance: W Corrosion class: V2 Product designation: BS EN 1856-2 T600 N1 W V2 L50012 G Compatible liner grades: MI-FLEX 316 and 904, subject to system approval Suitable fuels: Wood, smokeless fuel, gas and oil Installation location: Base of an existing masonry chimney GTIN / EAN: 8435265435793 What Does This Increasing Adaptor Do? A heating appliance may use a 125mm rigid connecting pipe while the approved chimney design calls for a 150mm flexib

This is a staging proof of concept, not a public search result or live checkout.